skip to main text

WPS (PIN Code) Connection

  1. Load three sheets of A4 or Letter-sized plain paper.

  2. Press the Information button (A) on the printer.

    The Network Configuration Page including a PIN code will be printed.

    figure: Press the Information button

  3. Press and hold the RESUME/CANCEL button until the Alarm lamp (B) flashes 10 times, and then release the RESUME/CANCEL button after the tenth flash.

    figure: Press and hold the RESUME/CANCEL button and the Alarm lamp flashes 10 times

  4. Follow the on-screen instructions on the computer to set the WPS PIN CODE described on the printed Network Configuration Page on the wireless router.

  5. Once connection to the wireless router is complete, the Online lamp lights up.

    figure: Online lamp lights up

    If the Alarm lamp lights up, see "Troubleshooting."

    The network connection setup is now complete.